Cupples' J&J Employee Benefits
Cupples' J&J Customer Sites and Standards
Cupples' J&J Laser Cutting, Plasma Cutting and Twister Fine Plasma Cutting
Cupples' J&J Company provides laser cutting, cnc punching, and turret press services along with cnc plasma cutting, cnc fine plasma cutting, production forming and production welding.
Cupples' J&J Company provides these services with the most state of the art equipment.
Laser Cutting;
2 ea - Bystronics BySpeed- 5,200 Watt Laser Cutting Machine
1 ea - Bystronics ByStar- 5,200 Watt Laser Cutting Machine
1 ea - Trumpf L3050 - 5,000 Watt Laser Cutting Machine
1 ea - Trumpf L3030 - 4,000 Watt Laser Cutting Machine
2 ea - Trumpf L3030 - 3,000 Watt Laser Cutting Machine
The capabilities are as follows;
 |
61" X 122" Cutting Table |
|
Pallet Shuttle |
|
Automatic Material Loader |
|
450 PSI Nitrogen Delivery to the point of cut |
|
Maximum Acceleration of 3G with maximum rapid speed of 11,800 inches/minute |
|
High Speed Cutting up to 2,000 IPM in the cut ( .040" aluminum ) |
|
Optical Probe for sensing and cutting on existing parts |
|
Auto-Las Plus Flying Optics for maintaining consistent cutting across the cutting surface |
|
Controlled pulse piercing for high speed piercing and cutting holes down to 1/2 material thickness |
|
Production Cutting capabilities of up to 1.00 inch thick carbon steel and .75 inch Thick Clean Cut stainless steel |
CNC Plasma Cutting ;
1 EA - Komatsu Twister TFP3051 150 Amp Fine Plasma Cutting Machine with the following;
|
60" X 120" Cutting table |
|
Production cutting capabilities up to 1.00" Carbon steel and 3/4" Thick Stainless Steel |
1 EA Koike - Aronson CNC Plasma Cutting Machine with the following;
|
60" X 240" Cutting table |
|
Production cutting capabilities up to 1" Carbon steel and 3/4" stainless steel |
All cutting equipment has Fittings Libraries for cutting most standard fittings.
Parts that are thick yet have some small holes can be cut by laser then machined in a cell with the laser / cnc drill tap machine.
Products;
|
Brackets ( flat or formed ), Flat plates, Guards, Flanges, Washers, Heat Shields, Misc. Sheet Metal Assemblies, Machined style parts up to 1" thick |
The Laser Cutting Division is also supported by CNC Punching , Robotic Welding, Machine shop , Screw Machine and General Sheet Metal Fabrication Divisions. Cupples' J&J could fabricate single parts up to entire assemblies.
CNC Punching and Stamping
Mig, Tig, Stick, Spot, Projection and Robotic Welding
Production CNC and Conventional Machining and Turning
Design and Build Special Machines
Millwright, Electrical, Moving and Rigging and Plant Maintenance Services