EQUIPMENT LIST

CUPPLES' J&J COMPANY EQUIPMENT LIST - 03/10/2008

DESIGN

5 ea --- Microstation Software with PC base with dual 20" monitors for machine design (Capabilities include: Autocad dwg, Dxf, Iges, Cgm, Image & Tex)

10 ea --- AutoCad LT 2006 CAD Stations

PROGRAMMING

17 ea --- CNC Programming Stations using EZ-Cam Milling, Turning and EDM Programming Software, GIBBS Multi-Axis Milling and Turning and Surfacing; PEP Laser and Plasma Programming Software, and Tops Trumpf Laser and Punch Programming Software and BySoft ByStronics Laser Programming Software Komatsu Twister Fine Plasma Programming Software.

CNC - COMPUTER NUMERICAL CONTROLLED EQUIPMENT

CNC - VERTICAL MACHINING CENTERS

2 ea --- TRAK DPM SX2 3 axis CNC Bedmills with up to x=32" ; y=16"

2 ea --- TRAK DPM SX3 3 axis CNC Bedmills with up to x=40" ; y=20"

8 ea --- Fadal CNC Milling Machines 40 taper with up to ; x=60"; y=30"; z=30"; with Right Angle Heads, and positioning and 3 ea with 4th axis contouring

1 ea --- KIWA V21i-R 2 APC CNC Milling Machines with Big Plus BT 40 Spindle; 12,000 RPM; x=24.00"; y=16.1"; z=20.1" travels pallets; with Right Angle Heads. Rapids of 2362 ipm; 5 Sec Chip to Chip; 5 sec Pallet Change; 12,000 RPM Spindle; 270 psi thru spindle coolant.

1 ea --- Matsuura RAIIF CNC Milling Machines with 23.16" x 16.9" pallets; with Right Angle Heads; 5 Degree Pump Style Horizontal Positional Indexers

1 ea --- Ares Seiki R Series 450 CNC Drilling and Tapping machine with travels x=17"; y=12" ; z=12"

1 ea --- Ares Seiki A Series 560 CNC Drilling and Tapping machine with travels x=22"; y=16"; z=14"; SMW 1 Degree Horizontal Rotary Indexer

1 ea --- KIRA VTC40A CNC Drilling and Tapping machine with travels x=47.2"; y=13.8" ; z=15.8"; SMW 1 Degree Horizontal Rotary Indexer

1 ea --- OKK CNC Milling Machine MCV 860 ; CAT 50 taper with x=81"; y=34"; z=29"

1 ea --- Okuma MVA 60 CNC ; 50 taper machining center with x=60"; y=24"; z=26"; SMW 1 Degree Horizontal Rotary Indexer

1 ea --- Mitsubishi MVS 17 Bridge type vertical machining center; CAT 50 taper with ; x=122"; y=67.9"; z=53.7"; with 30 taper Right Angle Heads

CNC HORIZONTAL MACHINING CENTERS

1 ea --- Toyoda FH45 ; CAT 40; 450 mm pallets ( 17.7" ) X=23.2"; Y=22.1"; Z=19.7" with 6,000 RPM, 270 PSI Thru the Tool Coolant ; 12 second pallet change; 10 second chip to chip; 4 second full rotation of 360 degree positional 4th axis , 2 APC.

1 ea --- Kitamura MyCenter HX500i ; Big Plus CAT 50; 500 mm pallets ( 19.7" ) X=34.30"; Y=28.00"; Z=26" with 12,000 RPM, 1,000 PSI Thru the Spindle Coolant ; 6 second pallet change; 6 second chip to chip; 2 second full rotation of full contouring 4th axis with 360,000 positions .

1 ea --- Kitamura MyCenter HX500 ; CAT 50; 500 mm pallets ( 19.7" ) X=34.30"; Y=28.00"; Z=26" with 12,000 RPM, 1,000 PSI Thru the Spindle Coolant ; 6 second pallet change; 6 second chip to chip; 2 second full rotation of full contouring 4th axis with 360,000 positions .

1 ea --- Mori Seiki NH5000R ; Big Plus CAT 50; 500 mm pallets ( 19.7" ) X=25.6"; Y=23.60"; Z=28.70" with 8,000 RPM, 1,000 PSI Thru the Spindle Coolant ; 6 second pallet change; 6 second chip to chip; 2 second full rotation of full contouring 4th axis with 360,000 positions . Also equipped with Reinshaw Probe System .

1 ea --- Kitamura MyCenter HX630i ; Big Plus CAT 50; 630 mm pallets ( 24.8" ) X=39.40"; Y=32.60"; Z=28" with 12,000 RPM, 1,000 PSI Thru the Spindle Coolant ; 5.5 second pallet change; 5.5 second chip to chip; 2 second full rotation of full contouring 4th axis with 360,000 positions .

CNC HORIZONTAL BORING MILL

2 ea --- FEMCO BMC 110R2 ; CAT 50; X=78.74"; Y=70.87"; Z=66.93"; w=21.65" with 2,500 RPM, 270 PSI Thru the Spindle Coolant ; rotation of full contouring 4th axis with 360,000 positions. Blume Probe System; 60 tool automatic tool changer; full guarding; FANUC 21iC Control; 13,889 Table Load

CNC TURNING EQUIPMENT

1 ea --- TRAK TRL 1840SX LATHE 18.5" swing X 40" centers x 9" over the cross slide

1 ea --- Methods Slant Jr. CNC w/14" swing x 11" turning, 1 5/8" bar capacity

1 ea --- Daewoo Lynx 200B CNC w/ 11" swing x 11.8" turning, 2" bar capacity

1 ea --- Methods Slant 50 CNC w/35 3/16" center 19 5/8" swing 2 ½" thru bar capacity

2 ea --- Okuma Cadet CNC Lathes w/ 2 ½ " thru bar capacity; 28" centers; 18" swing

3 ea --- Okuma LU 15 - 4 Axis Twin Turret CNC lathe w/ 2 ½ " bar capacity; up to 32" turning; 36" centers; 14" swing

1 ea --- Okuma LCC 15 - 4 Axis Twin Turret CNC lathe with 1 5/8" bar capacity; 14 " turning ; 11 " swing

1 ea --- Okuma LH 35 2000 - flat bed CNC lathes 24" Swing; up to 78.7 Centers

1 ea --- Okuma LH 35 3000 - flat bed CNC lathes 24" Swing; up to 118.31" Centers

1 ea --- Okuma LB35 CNC 24" Swing x 39.37" Centers

2 ea --- Miyano TMD42 - 3 axis turning centers with LIVE TOOLING on the X and Z AXIS. 42 MM bar capacity with 11" turning

2 ea --- Miyano LZ-01R - 2 axis turning centers with ROBOT LOADER - 2.75" turning dia x 3.15" turning length

1 ea --- Hardinage Conquest Precision 3 axis turning center with Live Tooling on the X and Z axis . 1 3/8" dia bar capacity. with 6" dia x 7" turning capacity.

1 ea --- Ganesh Cyclone 32CS - 32 mm Sliding Headstock Hybrid 7 Axis CNC Lathe with Subspindle and Magazine Bar Feeder. LIVE TOOLING on Front and Rear Spindles

LASER CUTTING AND PUNCHING EQUIPMENT

1 ea --- Amada FO 4020NT - 6,000 Watt Laser with 80" x 160" Pallets capable of cutting 1.25" thick mild steel and 3/4" clean cut for stainless steel equipped with Gorbel / Anver Manual Loading System. Machine has Controlled Pulse Piercing and Water assisted Cutting for thicker plate. System has 4500 IPM Rapid Traverse with 1 G Acceleration.

2 ea --- Bystronic BySpeed 3015 - 5,200 Watt ARC Laser with 5' x 10' Pallets capable of cutting 1" thick mild steel and 5/8" clean cut for stainless steel equipped with auto-material loaders. Equipped with Rapid Piercing System , 7,000 ipm Rapid Traverse and 3 G Acceleration.

1 ea --- Bystronic ByStar 3015 - 5,200 Watt ARC Laser with 5' x 10' Pallets capable of cutting 1" thick mild steel and 5/8" clean cut for stainless steel equipped with auto-material loaders. Equipped with Rapid Piercing System , 7,000 ipm Rapid Traverse and .6 G Acceleration.

1 ea --- Trumpf L3050 - 5,000 Watt Laser with 5' x 10' Pallets capable of cutting 3/4" thick mild steel and 3/4" clean cut for stainless steel equipped with auto-material loaders. Equipped with Rapid Piercing System , 11,800 ipm Rapid Traverse and 2 G Acceleration.

1 ea --- Trumpf L3030 - 4,000 Watt Laser with 5' x 10' Pallets capable of cutting 3/4" thick mild steel and 5/8" clean cut for stainless steel equipped with auto-material loaders.

2 ea --- Trumpf L3030 - 3,000 Watt Lasers with 5' x 10' Pallets capable of cutting 3/4" thick mild steel and 1/2" clean cut for stainless steel equipped with auto-material loaders.

CNC PUNCHING EQUIPMENT

2 ea --- Trumpf TC2000R CNC Hydraulic Punching Machine with 50" x 50" (50" x 100" plus with repositioning) travel, capable of cutting up to 1/4" mild steel. Maximum hit rate is 420 hits/minute on 1" centers. Also with tapping capability from #10-24 up to 5/16"-18 .

1 ea --- Trumpf TC2020R CNC Hydraulic Punching Machine with 50" x 100" (50" x 120" plus with repositioning) travel, capable of cutting up to 1/4" mild steel. Maximum hit rate is 420 hits/minute on 1" centers. Also with tapping capability from #6-32 up to 5/16"-18 .

PLASMA CUTTING

1 ea --- Komatsu Twister TFP3051 Fine Plasma Cutting Machine with a 60" x 120" table capable of cutting 1.00" mild steel AND 3/4" stainless steel

WIRE EDM

1 ea --- Charmilles ROBOFIL 440 Submerged Wire EDM with up to 30 degrees cutting angle at 15.75 inches thickness. Machine has travels of x=21.62 ; y=13.77 ; z=15.75.

CNC FORMING

11 ea --- Accurpress CNC Press Brakes up to 5 axis and up to - 250 Ton x 12-'0" . Machines include Willa Crowning Systems.

1 ea --- CMU CNC Press Brake up to 4 axis and up to - 35 Ton x 48" between frames.

1 ea --- Atek Bantum single axis 12 ton press brake with 24" bed length

ROBOTIC WELDING

5 ea -- Panasonic Robotic Welding Cells with 350 amp cv mig welding power supply and Up to 7 axis fixed tables , main rotary and independent rotary tables

CONVENTIONAL EQUIPMENT

CONVENTIONAL MILLING EQUIPMENT

18 ea --- Conventional Knee Mills -With (2) Axis readouts - Up to 48" Capacity

1 ea --- #3 Cincinnati with Tool Makers OverArm

1 ea --- #4 Cincinnati with Tool Makers OverArm

1 ea --- G & L Horizontal Milling Machine 12" X 20"

CONVENTIONAL TURNING EQUIPMENT

14 ea --- Conventional Lathes up to 42" swing with 60" gap swing x 17' - 6" B.C.

2 ea --- Warner Swazey #3 Turret Lathes 1 1/2" Dia

2 ea --- Brown & Sharp 2G Screw Machines 1 1/2" Dia

2 ea --- Brown & Sharp Ultramatics 1 5/8" Dia

1 ea --- Wickman Multispindle 1" Dia Max - 6 Spindle

2 ea --- Wickman Multispindle 1-3/4" Dia Max - 6 Spindle

DRILL PRESSES

3 ea --- Radial Arm up to 4'

2 ea --- Stand Drill Press

2 ea --- Twin Spindle Drill Stations

1 ea --- Station Automatic Drill Center 1/2" Dia

1 ea --- Horizontal Milling Machine 12" X 20"

1 ea --- 6-Spindle Drill Presses 3/4" Dia

1 ea --- 4-Spindle Drill Presses 3/4" Dia

SURFACE GRINDERS

1 ea --- 48" Dia Blanchard Grinder

1 ea --- 36" Dia Blanchard Grinder

3 ea --- 12" x 24" Surface Grinder

BROACHING EQUIPMENT

1 ea --- LaPoint Type 25 - 8 Ton Horizontal Broach

SAWS

2 ea --- Cut off Saw - 12" Capacity

3 ea --- DoAll Production Feed thru cut off saw - 12"

1 ea --- HYD MECH S-20DSP - Double Miter Capable - up 60 degree miter in two directions; 13" x 18" straight; 8" x 10" at 60 degrees

1 ea --- DoAll CNC Production Feed thru cut off saw - 18"

6 ea --- Vertical Band Saw

WELDERS

2 ea --- Automatic Mig Welders with Reiner Rotary Welding Stations

24 ea --- Tig Welders

10 ea -- Mig Welders - CV and Pulse also with Aluminum Pulse Mig welding attachments

2 ea --- Stud Welders up to 3/8" dia

1 ea --- 30 KVA Rocker Arm Spot Welder

1 ea --- 120 kva GE Schmidt press type Spot Welder and Projection Welder

3 ea --- Conventional Plasma Cutters up to 1 1/4" Thick Capacity

16 ea --- Acetylene Welding/Torch Rigs

1 ea --- Lincoln NA5 Semi- Automatic Dual Head Submerged Arc Welding System with up to 108" welding capacity and also capable of hard facing up to 58Rc

STRESS RELIEF EQUIPMENT

2 ea --- Formula 62 Stress Relief Machine

CONVENTIONAL FABRICATION EQUIPMENT

3 ea --- Accurpress Shears up to 1/4" ss and 3/8" mild steel x 10' 0"

4 ea --- Conventional Hydraulic Press Brakes up to 330 Ton x 12'-0"

2 ea --- Piranha iron workers

5 ea --- Rolls up to 3/8" x 60" AND 10 GA X96"

1 ea --- Apkayak APK 100 Angle and Channel Roll - up to 6" x 2-1/2" channel leg in and 4" x 4" x 1/2" angle legs in.

STAMPING PRESSES

1 ea --- Verson Punch Press 45 Ton

1 ea --- Rouselle Punch Press 75 Ton

1 ea --- Rouselle Punch Press 95 Ton with Rapid Air Coil Feed - 12" feed x 12" wide coil x up to 7 ga thickness

HYDRAULIC PRESSES

3 ea --- Up to 75 Ton Dake Press

ROD AND TUBE BENDING EQUIPMENT

2 ea --- Dennison Multi-press 10 Ton

2 ea --- Dennison Multi-press 6 Ton

1 ea --- Pines #3 Pines Bender 1 - 1/8" Dia x .062 wall Tubing

DEBURRING EQUIPMENT

1 ea --- Ultramatic Vibratory Deburring Machine - Wet system with automatic chemical mix, automatic discharge chute, ( 15" wide channel , 14 inches deep )

1 ea --- Timesaver Wet Belt Sanding system with a 9" wide part capacity.

QUALITY ASSURANCE

1 ea --- Brown & Sharp CMM 24" x 24" Reflex 454

1 ea --- Brown & Sharp CMM 24" X 30" EXCEL; PC-DMIS SOFTWARE

1 ea --- Brown & Sharp CMM 30" X 42" EXCEL; PC-DMIS SOFTWARE

1 ea --- Brown & Sharp CMM 30" X 42" Global with full articulating probe system; PC-DMIS SOFTWARE

1 ea --- FARO ARM - FARO Gauge - 48" volume with 12" extensions for up to 72" volume for deep or long part accuracy +/- .0004"

1 ea --- FARO ARM - FARO Gauge PLUS - 48" volume with 12" extensions for up to 72" volume for deep or long part accuracy +/- .0002"

TRUCKS/LIFTS/RIGGING EQUIPMENT

3 ea--- 9 Ton Grove Portable Crane (Can Drive in any 8' x 8' Wide door . Crane has a 30 foot reach, 19 TON CAPACITY )

13 ea --- Forklifts (From 4,000 to 80,000 lb. capacity - 4 each with booms for rigging)

4 ea --- Scissors Lifts